Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||20 July 2005|
|PDF File Size:||14.69 Mb|
|ePub File Size:||7.13 Mb|
|Price:||Free* [*Free Regsitration Required]|
A Husqvarna chain saw can be equipped with different types of airfilter according to working and weather conditions, season etc. Assembly Mounting guide bar and chain Always wear gloves, when working with the chain, in order to protect your hands from injury.
The only way to avoid kickback is to make sure that the kick- back zone of huqvarna bar never touches anything. Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
Always wear safety goggles for eye protection.
Husqvarna 346XP Operator’s Manual
Below you will find some general maintenance instructions. This manual also for: The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes.
Table of Contents Add to manal manuals Add. Chain Catcher The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. Page 22 C Clearing the trunk and preparing your retreat Remove any branches that hjsqvarna in the way. Page 11 1 Cutting equipment designed msnual minimise kickback Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback.
H Bar Check regularly: Tree Felling Technique 2 The log is supported at one end.
Husqvarna 346XP 351 User Manual
Never limb above shoulder height. If you have spilt fuel or chain oil on the saw. Maintenance First adjust 34x6p L-jet, then the idling screw T and then the H-jet.
Take off the bar nuts and remove the clutch cover.
You must use approved husqvarnq protective equipment whenever you use the machine. Basic Cutting Technique Before moving your chain saw switch off the engine and lock the chain using the chain brake.
Cutting Equipment 7 Muffler Never use a chain saw that has a faulty muffler. Chain saws can be dangerous! Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle. Before moving your chain saw switch off the engine and lock the chain using the chain brake. Carry the saw with the bar and chain pointing backwards. Press the throttle lock and make sure it returns to its original position when you release it.
Husqvarna Workshop Manual 50 pages. Throttle Lock 2 Throttle lock Make sure the throttle control is locked at the idle setting when you release the throttle lock.
Winter use – Husqvarna XP E-tech User Manual – Page 37 of 44 |
This is especially true of chain saw safety equipment. General Rules General rules If you understand what kickback is and how it happens then you can reduce or eliminate the element of surprise. Daily Maintenance Below you will find some general maintenance instructions. Spark plug The spark plug condition is influenced by: Adjustments are made by hksqvarna the screw using a screwdriver or combination spanner.
The chain brake reduces the risk of accidents, but only You can prevent them. Remove these with a file if necessary. When you buy any of our products we guarantee the availability of professional repairs and service. Page 12 2 Sharpening your chain and adjusting raker clearance The risk of kickback is increased with a badly sharpened chain!